Are you facing connection problems with your Arlo baby camera? Has the camera dashboard screen stuck after the Arlo camera setup process? Or are you facing a minor issue with your camera whose reason is still unknown? If you have answered any of these questions in yes, you can reboot your camera. This post will tell you how to reboot Arlo baby camera properly so that you can have a seamless experience using its services.
What Happens When You Reboot Arlo Baby Camera?
An Arlo baby camera is a unique and beautiful offering by Arlo especially designed to monitor activities of kids. But, it can deny working well due to some reasons. If you restart or reboot the baby camera, it will recalibrate the air sensors and resolve frozen video issues.
Thus, before you step ahead to employ any other troubleshooting tip to resolve the aforementioned issues, it is recommended that you restart or power cycle the camera. The instructions are provided in the upcoming section.
How Do I Reboot Arlo Baby Camera?
In order to restart or power cycle the baby camera from Arlo, you are required to follow the below-given instructions. There’s no need to access myarlo.com login URL or use the Arlo app. All you need will be the camera.
- Start by disconnecting the USB cable from your Arlo baby.
- Now, you are required to rotate the foot plate.
- The next thing you need to do is remove the character feet of your camera.
- Locate the battery switch of the camera.
- Generally, the battery switch is at the bottom of Arlo baby.
- Slide this switch to the Off position.
- If you cannot see the green light near the battery switch, it means that the camera’s battery is off.
- Consider waiting for 10 seconds.
- Slide the battery switch to the On position.
- The Baby camera will restart.
- Rotate the foot plate now.
- Keep rotating until the footplate clicks into place.
- Now, you can plug the USB cable back in.
This is how you can reboot your Arlo baby camera directly. Just in case, you are facing bare minimum issues managing your camera, you can also use the app interface in order to reboot/restart the camera. All you have to do is complete Arlo login via app and then follow the instructions given in the next section.
How to Reboot Arlo Baby Camera via App?
| Arlo Secure App with Feed | Arlo Secure App with Library |
|---|---|
| Open the Arlo app. | Launch the Arlo Secure app. |
| Tap Devices. | Tap Devices. |
| Choose Arlo Baby camera. | Select My Devices. |
| Select My Devices. | Select My Devices. |
| Find the Device On switch and tap to turn the camera off. | Toggle the Device On/Off switch and turn off the baby camera. |
| Wait for a few seconds and tap the switch again to turn on the Arlo Baby camera. | Consider waiting for a few moments and switch on the camera by toggling the switch to the On position. |
The Conclusion
This was all about how to reboot your Arlo Baby camera directly and using the Arlo mobile application. We are hopeful that you will be able to restart the camera successfully. This is to inform you that some users mistake reboot as reset and tend to restore their cameras to the default factory settings. Rebooting is a simple restart which involves disconnecting the camera from power for a few seconds whereas the reset process is all about erasing the customized settings of the camera. Be careful about these terms and do what is needful.