Do you own an Arlo security camera? Arlo cameras have been the top pick for the past few years due to their top-notch performance. Built with cutting-edge technology, the Arlo cameras provide the best video quality. There are Arlo cameras that are wired and also cameras that are battery operated. This post will guide you through best practices to position and place an Arlo wire free camera for setup.
Best Practices for Arlo Wire Free Camera Placement
Here are a few factors that you need to consider while placing your Arlo wrie free camera in your home so that you get the best video feeds from it.
1. Max Distance From the Base Station
An Arlo camera can be used with or without the Base Station or the Smart Hub. In case you are using one, then you must know that the distance separating the Arlo camera and Base Station plays a vital role.
You should place the camera a minimum of 300 feet or 90 meters away from the Base Station. There should be a direct line of sight from the camera to the Base Station. The maximum distance does not consider other obstructions between the two devices. Walls, ceilings, and other objects can block the signals between them. So, you should consider the other blockages in between and then decide the maximum distance between them.
2. Min Distance Between Arlo Camera and Base Station
The minimum distance between the camera and the Base Station is equally important as the maximum distance. The distance if reduced below the minimum amount can cause signal interference.
The minimum distance can be 10 feet or 3 meters. Do not reduce the distance further than this amount to avoid signals getting interfered.
3. Distance From the WiFi Router
You should make sure that the Arlo wire free camera is placed within the network range of the WiFi router. This is essential as the camera needs an internet connection to operate. Have minimum obstructions between the camera and the router. Also, be certain that the camera is not placed too close to the router.
4. Elevate the Arlo Wire Free Camera
For Arlo camera setup, the camera must be elevated for better view. The camera must be at least 7 feet or 2.1 meters above the ground level. Also, aim it downwards so that it can capture a better view. Most of the Alro cameras come with a wall mount. You should position it in a way that it is elevated but is positioned downwards.
5. Position Towards Active Locations
There would be certain locations in your home that you want to monitor using your Arlo camera. For example, you want to keep an eye on the main gate of your home. You want to see the visitors and someone who is crossing your main gate. Keep the target areas into account while placing and positioning the camera. You ought to get a clear view of the targeted area. The camera’s field of view should be able to capture clear video of the main gate or the area you wish to monitor.
6. Consider Active Locations
There are many places in the home where there is activity going on most of the time. For example your living room. The Arlo camera’s motion sensor becomes active when it senses a motion. So, you should avoid placing the camera t a place where the motion sensor is overly active. A busy road for example will have the camera active all the time. This drains out the camera batteries. So, be careful while you are placing the camera.
7. Avoid Blockages
The camera should have a clear view of the target area. It should not look through a mirror or glass. Also, there should be no blockages like a wall, trees, windows etc. Place the camera in such a way that it can capture a clear view of the area you want to monitor using the camera.
The Closing Note
Make sure you are considering all the above-given guidelines while you are placing and positioning your Arlo wire free camera for setup. Apart from this you should make sure that the camera batteries are sufficiently charged and the firmware on the camera is upgraded to the recent version to get the best video quality.