Most Common Tips to Fix Arlo Base Station Lights Orange Issue

In case you are one of those users who are experiencing the Arlo base station lights orange issue, then know that this it is because of no internet. To help you troubleshoot this issue, we have highlighted some hacks in this blog. Walk through them one by one and learn how to fix the issue that you are currently stuck with.

[Fixed] Arlo Base Station Lights Orange Issue

1. Check the Condition of Cable

Before making your way to any other troubleshooting hack, it is recommended that you check if the Ethernet cable currently in use is damage-free or not. If it is not, then you just came across the first reason behind the Arlo base station lights orange issue. In order to troubleshoot it, it is recommended that you tape up your Ethernet cable.

Although this will work for you, by any chance, if it does not, then consider getting a new Ethernet cable. Once you have brought a new cable, use it for the establishment of the connection. Once done, se if you are able to resolve the Arlo base station lights orange issue. Did you still get no luck? Well then, you ought to read the next troubleshooting tip.

2. Power Cycle the Arlo Camera

Another way through which one can troubleshoot the Arlo base station lights orange issue is by power cycling the Arlo camera. Now, you might be confused about the term power cycle, right? Well, it is just another word for restart. Thus, in other words, you need to restart your networking device.

Restarting the camera is possible if you locate the power button on it and press it. Once done, hold on for some time, and then, power on the camera. Now, check again if resolving the issue at hand is possible for you or not. In case, you are still going bonkers because of it, then perhaps you should get in touch with our team.

3. Look at the VPN Settings

Considering you are reading this hack, it means that you are chose to troubleshoot the issue on your own rather than reaching out to our professionals. Well then, take a look at the settings of the router that you are using right now and see if it has VPN enabled or not. If it does, then congratulations! The third reason why you are in this mess is disclosed.

Taking this into account, you need to ensure that your router is not using VPN. If you are unaware of how to do that, then it is recommended that you refer to the instructions given in the user manual of your device which you got at the time when you were purchasing it from the shop or showroom.

4. Reset the Arlo Base Station

Did none of the aforementioned troubleshooting hacks help you to resolve the Arlo base station lights orange issue? Well then, your last resort is to reset the Arlo base station. This can be done if you carefully walk through the guidelines highlighted in the following paragraph. Trust us, they will help you out.

Locate the Reset button on the Arlo base station. Whenever you find it, press it carefully for some time. As soon as the reset process comes to an end, your Base Station will reboot. It is recommended that you do not interrupt the process. Otherwise, you can goodbye to troubleshooting the issue that you are facing.

In Conclusion

Here ends the blog written on how to resolve the Arlo base station lights orange issue. Hopefully, you found this blog helpful. On the off chance, you are still experiencing the same issue, you already know from where to get help. Worry not. Without taking much of your time, you will be able to resolve the issue at hand with the assistance of our professionals.