This blog post covers every solution in existence through which the Arlo camera batteries not charging issue can be resolved. So, in case you are facing this issue like many others out there, then you should not waste any more time reading what is given in this guide.
How to Charge Arlo Camera Batteries?
1. Check the Power Which is Being Supplied
Let us be honest, every device needs proper power in order to work. Your Arlo camera does too. However, in case it is not receiving an adequate and uninterrupted power supply from the wall socket that has been assigned the same task, then it is no shocker why the Arlo camera batteries are not getting charged. Do you agree to what we are saying?
To prevent this issue from troubling you any further, it is recommended that you check whether the wall socket is damaged or not. In case, it is, then you need to call an electrician and get it repaired. Most probably this will work for you in getting the batteries charged up. However, if it does not, then use another power socket.
Additional Tip: Make sure that the new socket is not short-circuited. Otherwise, you will continue to experience the issue that you are right now with your device.
2. Time to Give the Arlo Camera a New Start
Another reason why you are experiencing the Arlo camera batteries not charging issue is because of technical glitches or hiccups. What is that? Do you not know what glitches are? Well, according to the definition of Oxford dictionary, the term glitch means a sudden, usually temporary malfunction or fault of equipment.
They can mess around with the performance of a device without necessarily damaging it. Chances are that the same thing is happening in your case. Taking this into consideration, you need to get rid of them so that they do not degrade the functionality of your camera any further. To do so, you need to restart your device.
How to Restart Arlo Camera?
Here are the instructions that you need to go through in order to restart or reboot the Arlo camera that you own at the moment:
- Locate the power button located on the camera.
- Press it carefully for about 30 seconds.
- Release the button after you feel that you have waited enough.
- For better results, it is recommended that you remove the batteries.
For your information, restarting the device is also possible by accessing the user interface via the Arlo camera login credentials, however, not in this case.
3. Restore the Arlo Camera to Default Settings
Did none of the above mentioned most common tips help you to resolve the Arlo camera batteries not charging issue? Well, it is probably because of a reason that is not known to you. Rather than wasting your time in figuring it out, you should straight away reset the camera to the factory default mode.
You can do so by locating the sync button on the camera. Once located, press it and hold on for about 15 seconds as per the information given on the official website of Arlo. Wait to ensure that the LED light located on the camera is blinking blue. Once done, you need to release the button. Your camera has been successfully restored.
Additional Tip: Now that you have learned how to reset your networking device, it is advised that you set it up from scratch using the login credentials.
What Now?
This section should only be read by you if the same issue is troubling you. Check if the batteries of the camera are damaged. In case, they are, they should opt for a replacement immediately. Are you not sure about how this can be done? Well, it is quite easy. You need to visit the place from where you bought the camera. But, before you do that, make sure that everything is in order from your end at least.
Wrap Up
Once you have gone through the most common solutions provided above, troubleshooting the Arlo camera batteries not charging issue will become a piece of cake for you. In case you are a magnet of technical issues, it is recommended that you visit this website often.
Whenever you get stuck with Arlo-related issues, you will find the solutions to get rid of them in the blog post of this website. What is that? Do you not believe us? Well, in that case, you should take a round when needed here and see for yourself.